manualshive.com logo in svg

Motorola Solutions WiNG 5.2.6, Справочное руководство

"Motorola Solutions WiNG 5.2.6" - это программное обеспечение для беспроводной связи, которое позволяет оптимизировать сеть в вашем предприятии. Скачайте бесплатно Руководство по эксплуатации справочное Руководство с нашего веб-сайта, чтобы получить все необходимые инструкции по использованию этого продукта. Посетите manualshive.com для загрузки.

Поделиться
Скачать
background image

Appendix B Publicly Available Software B - 23

Each version is given a distinguishing version number. If the Library specifies a version number of this License which

applies to it and "any later version", you have the option of following the terms and conditions either of that version
or of any later version published by the Free Software Foundation. If the Library does not specify a license version
number, you may choose any version ever published by the Free Software Foundation.

14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible

with these, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.

NO WARRANTY

15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT

PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH
YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,

OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE
TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR
DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE
LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEE ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.

B.3.6 GNU Lesser General Public License 2.1

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

Copyright (C) 1991, 1999 Free Software Foundation, Inc.

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away yourfreedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.

This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you
first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any
particular case, based on the explanations below.

Содержание Solutions WiNG 5.2.6































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Solutions WiNG 5.2.6

Raisecom iTN201-R Hardware Description preview
iTN201-R
Бренд: Raisecom Страницы: 84
SMC Networks 7904WBRA Quick Installation Manual preview
7904WBRA
Бренд: SMC Networks Страницы: 2
ZyXEL Communications G-1000 V2 Quick Start Manual preview
G-1000 V2
Бренд: ZyXEL Communications Страницы: 11
Alvarion BreezeNET BU Quick Installation Manual preview
BreezeNET BU
Бренд: Alvarion Страницы: 9
Zonet ZSR2104WE User Manual preview
ZSR2104WE
Бренд: Zonet Страницы: 45
NAUTITECH Wi-Fi Bubble SpitFire Manual preview
Wi-Fi Bubble SpitFire
Бренд: NAUTITECH Страницы: 22
Linksys FGMM1000 User Manual preview
FGMM1000
Бренд: Linksys Страницы: 30
Linksys BEFW11S4-AT User Manual preview
BEFW11S4-AT
Бренд: Linksys Страницы: 31
Linksys E5600 User Manual preview
E5600
Бренд: Linksys Страницы: 135
ARGtek ARG-1220 Quick Installation Manual preview
ARG-1220
Бренд: ARGtek Страницы: 14
TP-Link TL-WR340G - Wireless Router Quick Installation Manual preview
TL-WR340G - Wireless Router
Бренд: TP-Link Страницы: 2
TP-Link TL-WR542G User Manual preview
TL-WR542G
Бренд: TP-Link Страницы: 70
TP-Link 54Mbps Wireless Access Point TL-WA501G User Manual preview
54Mbps Wireless Access Point TL-WA501G
Бренд: TP-Link Страницы: 43
TP-Link AP500 User Manual preview
AP500
Бренд: TP-Link Страницы: 55
Ajoho WFA9271M01 User Manual preview
WFA9271M01
Бренд: Ajoho Страницы: 24
SONBEST SM1208T User Manual preview
SM1208T
Бренд: SONBEST Страницы: 5
EnGenius ECM355AP User Manual preview
ECM355AP
Бренд: EnGenius Страницы: 20
Lafalink LF-OAP50 Quick Installation Manual preview
LF-OAP50
Бренд: Lafalink Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды