Motorola Solutions WiNG 5.2.6 Скачать руководство пользователя страница 544

Страница: 544 / 670

12 - 42 WiNG 5.2.6 Access Point System Reference Guide

9. The

IP Domain

field displays the following:

10.The

DNS Mappings

field displays the following:

11.The

Firmware Images

field displays the following:

12.The

Upgrade Status

field displays the following:

13.The

Power Management

field displays the following:

Maximum
Buffers

Lists the maximum buffers available to the selected access point.

IP Domain Name

Displays the name of the IP Domain service used with the selected access
point.

IP Domain
Lookup state

Lists the current state of the lookup operation.

Name Server

Displays the names of the servers designated to provide DNS resources to
this access point.

Type

Displays the type of server for each server listed.

Primary Build
Date

Displays the build date when this access point firmware version was created.

Primary Install
Date

Displays the date this version was installed.

Primary Version

Displays the primary version string.

Secondary Build
Date

Displays the build date when this version was created.

Secondary
Install Date

Displays the date this secondary version was installed.

Secondary
Version

Displays the secondary version string.

Upgrade Status

Displays the status of the image upgrade.

Upgrade Status
Time

Displays the time of the image upgrade.

Power
Management
Mode

Displays the power mode currently invoked by the selected access point.

Содержание Solutions WiNG 5.2.6































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Solutions WiNG 5.2.6

Отзывы:

Motorola Solutions WiNG 5.2.6, Справочное руководство, Страница: 544 / 670

Результаты поиска

Содержание Solutions WiNG 5.2.6

Отзывы: