Motorola Solutions WiNG 5.2.6 Скачать руководство пользователя страница 545

Страница: 545 / 670

Statistics 12 - 43

12.3.3 AP Upgrade



Access Point Statistics

The

AP Upgrade

screen displays information about both access points used receiving updates and access points used to

update access points. Use this screen to gather version data, installed firmware image versions, boot image and upgrade
status.

To view the access point upgrade statistics:

1. Select the

Statistics

menu from the Web UI.

2. Select

System

from the navigation pane (on the left-hand side of the screen), expand the default node and select an

access point for statistical observation.

3. Select

AP Upgrade

Figure 12-25

Access Point - AP Upgrade screen

4. The

Upgrade

screen displays the following information:

Power
Management
Status

Lists the power status of the access point.

Ethernet Power
Status

Displays the access point’s Ethernet power status.

Radio Power
Status

Displays the power status of the access point’s radios.

Upgraded By

Displays the MAC address of the access point that performed the upgrade.

Содержание Solutions WiNG 5.2.6































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Solutions WiNG 5.2.6

Отзывы:

Motorola Solutions WiNG 5.2.6, Справочное руководство, Страница: 545 / 670

Результаты поиска

Содержание Solutions WiNG 5.2.6

Отзывы: