Motorola Solutions WiNG 5.2.6, Справочное руководство

Страница: 91 / 670

Device Configuration 5 - 33
6. If required, select a radio and select the Edit button to modify the radio’s configuration.
Figure 5-17 Access Point Radio - Radio Settings tab
The Radio Settings tab displays by default.
7. Define the following radio configuration parameters from within the Properties field:
RF Mode Displays whether each listed radio is operating in the 802.11a/n or
802.11b/g/n radio band. If the radio is a dedicated sensor, it will be listed as a
sensor to define the radio as not providing typical WLAN support. The radio
band is set from within the Radio Settings tab.
Channel Lists the channel setting for the radio. Smart is the default setting. If set to
smart, the access point scans non-overlapping channels listening for beacons
from other access points. After the channels are scanned, it selects the
channel with the fewest access points. In the case of multiple access points
on the same channel, it will select the channel with the lowest average power
level.
Transmit Power Lists the transmit power for each radio. The column displays smart if set for
dynamic Smart RF support.
Description Provide or edit a description (1 - 64 characters in length) for the radio that helps
differentiate it from others with similar configurations.