Motorola Solutions WiNG 5.2.6, Справочное руководство

Страница: 171 / 670

Device Configuration 5 - 113
6. Select OK to generate the RSA key. Select Cancel to revert the screen to its last saved configuration.
7. To optionally import a CA certificate, select the Import button from the RSA Keys screen.
Figure 5-63 Certificate Management - Import New RSA Key screen
8. Define the following configuration parameters required for the Import of the RSA key:
Key Size Use the spinner control to set the size of the key (between 1,024 - 2,048 bits).
Motorola Solutions recommends leaving this value at the default setting of
1024 to ensure optimum functionality.
Key Name Enter the 32 character maximum name assigned to the RSA key.
Key Passphrase Define the key used by both the access point and the server (or repository) of
the target RSA key. Select the
Show textbox to expose the actual characters
used in the passphrase. Leaving the Show checkbox unselected displays the
passphrase as a series of asterisks “*”.
URL Provide the complete URL to the location of the RSA key.
Protocol If selecting Advanced, select the protocol used for importing the target key.
Available options include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
Port If selecting Advanced, use the spinner control to set the port. This option is not
valid for cf, usb1 and usb2.
IP Address If selecting Advanced, enter IP address of the server used to import the RSA
key. This option is not valid for cf, usb1 and usb2.