Motorola SE3300, Руководство по интеграции

Страница: 56 / 74

5 - 12 SE3300 Integration Guide
GET_FSTATS 0x81 0x81 Returns 5 Bytes as
follows:
(W) Exposure
(B) Gain
(B) BIN
(B) Statistics
LCD_MODE 0x82 (B) # No-light Frames (B) # Frames 0x82
EXEC_INLINE 0x83 (B) Reserved (A) Script Data 0x83
ENTER_BOOTLOADER 0x91 (A) Signature (3 bytes: 0xAA, 0x50, 0x5F) 0x91
AIM_POWER 0xF3 (B)
0x00* = Aim's duration is controlled by
Exposure and Readout times.
0x01-0xFF = Aim's duration increments
from 0.5 ms in 0.5 ms duration, its
maximum value controlled by Exposure
and Readout time. 0xF3 -
AIM_BLINK_RATE 0xF4 (B) On Time
in ~17ms increments (B) Off Time
in ~17ms
increments 0xF4 -
Table 5-3
SE3300 Command and Response Formats (Continued)
Function
SE3300 Command SE3300 Response
Op SE3300 Command Data
Note1
Op SE3300 Response Data
Note2
Notes:
1. Every command has a 1 byte checksum (last byte of command). See
Command Checksum on page 5-4 .
2. Every response has a 1 byte status code immediately following the Opcode. See Response Status
Code on page 5-4 .
3. These commands/responses have a variable length data field indicated by (A):Array.
See
Table 5-4 on page 5-13 for the length of the field based on the param number.