Motorola SB1, Руководство интегратора

Страница: 83 / 136

Staging and Deployment 4 - 25
On-going MSP Management
This section provides additional information for managing the SB1 using MSP features. In order to manage the
SB1 using MSP, the MSP Agent on the SB1 must first be activated via staging. See
Enrollment for
Management by MSP on page 4-16
for more information.
Reboot Deployment Steps
On the SB1, a reboot is always performed automatically at the end of every bundle. If the intent is to just
perform a reboot of the SB1, then use a bundle with no deployment steps. If the intent is to reboot the SB1
between each package, include a reboot deployment step between the packages but do not end the bundle
with a reboot deployment step to avoid a double reboot. One from the reboot deployment step and the other
from the end of the bundle.
Send Jobs Only When SB1 is in Cradle
To send a bundle only when the SB1 is in a cradle:
1.
Create a Power Condition Object where:
•
First line prompt, Second line prompt, and Third line prompt are all set to empty.
•
Delay (seconds) is set to 0.
•
Enable countdown is set to False.
•
Require power level is set to A/C.
2.
For any Policy or Action that is applicable to any SB1 and where it is desired that Jobs occur only when the
SB1 is in the cradle:
•
On the Readiness Conditions page of the Policy or Action, select the Condition created in step 1.
3.
When the Policy fires or the Action is executed:
•
A Job is sent and is evaluated by the SB1.
•
If the SB1 is not in the cradle, then the Job is deferred.
•
On each subsequent check-in, the Job is re-evaluated and, if the SB1 is in the cradle, then the Job is
executed.
Customizing the UpdateInProgress Package
To customize the
UpdateInProgress
package:
1.
Locate the
UpdateInProgress.APF
package file in the folder to which you extracted the MSP 4.2
Supplement for SB1.
2.
Using the
MSP Package Builder
open the
UpdateInProgress.APF
package file.
3.
Select
Tools
>
Convert to Project
.
a.
Enter a name for the new package.
b.
Enter the location for the new package project file (.MSPPROJ) and the extracted content files.
NOTE
For use with MSP only.