Motorola SB1, Руководство интегратора

Страница: 54 / 136

3 - 18 SB1 Integrator Guide
Configuring WLAN Settings
SB1 does not provide a user Interface to configure many of the WLAN configurations supported by Fusion.
This includes WLAN profile configurations and WLAN options. Use of an MDM is required to configure these
settings. Alternately, use the
Import Locally
application to import wireless configuration data exported from a
device running Fusion X2.00 or Fusion X2.01.
Supported WLAN Profiles
Fusion in SB1 supports both Infrastructure and Ad-hoc modes of operation. Fusion supports different types of
Authentication and Encryption methods. But the Fusion user interface of the SB1 allow user to create only a
subset of profiles (Open, WPA Personal (TKIP) and WPA2 Personal (AES)). Other profiles like 802.1x profiles
cannot be created from SB1 user interface. Use the MSP staging method or the
Import Locally
application to
create/import these types of WLAN profiles.
While connecting to an 802.1x profile where the credentials are not entered as part of the WLAN profile, The
SB1 prompts the user to enter credentials (username and/or password and/or domain).
Table 3-8
lists the different types of Authentication and Encryptions supported in SB1.
Table 3-9
lists the Tunneled Authentications supported for PEAP, TTLS and EAP-FAST authentications.
Table 3-8
Security Modes
Security Mode Authentication Types Encryption Types
Legacy (Pre-WPA) None,
EAP-TLS,
EAP-FAST,
PEAP,
LEAP,
TTLS
Open,
WEP-40 (40/24),
WEP-104 (104/24)
WPA - Personal None TKIP
WPA2 - Personal None TKIP,
AES
WPA - Enterprise EAP-TLS,
EAP-FAST,
PEAP,
LEAP,
TTLS
TKIP
WPA2 - Enterprise EAP-TLS,
EAP-FAST,
PEAP,
LEAP,
TTLS
TKIP,
AES