Motorola SB1, Руководство интегратора

Страница: 51 / 136

Wireless Settings 3 - 15
Figure 3-23
Trace Route Window
In the
IP
drop-down list, enter an IP address or choose one from the drop-down list, or enter a DNS Name and
touch
Start Test
. When starting a test, the trace route attempts to find all routers between the mobile computer
and the destination. The Round Trip Time (RTT) between the mobile computer and each router appears, along
with the total test time. The total test time may be longer than all RTTs added together.
Use the
DNS Lookup Options
button to select the name resolution priority. Select the option and touch the
OK
button. If a name is entered in the IP field, DNS Lookup Options setting will decide whether to use IPv4 or
IPv6 address for the test. By default, this is set to IPv4 then IPv6, which indicates that it will try to resolve the
name to an IPv4 address; if this fails and if IPv6 is enabled, it will try to resolve the name to an IPv6 address.
Figure 3-24
DNS Lookup Options Window
Known APs Window
The
Known APs
window displays the APs in range using the same ESSID as the mobile computer. This
window is only available in
Infrastructure
mode. To open the
Known APs
window, touch
Known APs
in the
Wireless Diagnostics
window.
Figure 3-25
Known APs Window
See
Table 3-7
for the definitions of the icons next to the AP.