Motorola SB1, Руководство интегратора

Страница: 32 / 136

2 - 10 SB1 Integrator Guide
Wall Mounting
To mount the Ten Slot Charge Only Cradle and Mounting Bracket to a wall:
For proper installation consult a professional installer. Failure to install the Wall Mount Bracket properly can
possibly result in damage to the hardware.
1.
Mark the four screw hole locations and drill holes.
Figure 2-9
Screw Template
2.
Install the four screws and/or anchors into the wall.
3.
The screw heads should protrude 2.5 mm (0.01”) from the wall.
Figure 2-10
Mounting Bracket onto Screws
4.
Align the mounting bracket’s mounting holes with the screws. Place the bracket/cradle assembly on the
screws.
5.
Slide the bracket/cradle assembly to the left and down.
Rack Mounting
To mount the Ten Slot Charging Cradle onto a standard rack:
CAUTION
Use mounting hardware (screws and/or anchors) appropriate for the type of wall mounting the bracket
onto. The Mount Bracket mounting slots dimensions are 5 mm (0.2 in.). Fasteners must be able to
hold a minimum of 4.5 Kg (10 lbs.)
215 mm
8.46 in.
58.7 mm
2.31 in.