Motorola RPU2160, Инструкция по установке и эксплуатации

Страница: 44 / 80

32
ALKALINE BATTERY
FRAME
Installation Guide
4.
Arrange alkaline batteries to match each of
the alkaline frame batteries’ polarity (+ or -)
markings and slide them into each one of the
alkaline battery frame compartments. Repeat
until 12 batteries have been properly placed.
Plug in the power harness. “Figure 16c:
Installing the Alkaline Batteries” on page 32
.
5. Make sure the repeater’s internal cable is
connected between the repeater and the
battery frame.
6. Assemble the alkaline battery frame (loaded
with the alkaline batteries) into the back of
the repeater by tightening securely the four
screws on each of the four corners on the
back of the repeater. Please refer to “Figure
16b: Installing the Alkaline Battery Frame
into/from the Repeater” on page 31.
LI-ION BATTERY FRAME (OPTIONAL
ACCESSORY)
The repeaters are capable of operating with Li-Ion
batteries. The Li-Ion Battery Frame, P/N
HKHN4004 is sold separately as an accessory.
1
2
Figure 16c: Installing the Alkaline Batteries
When securing back the alkaline frame
lid into the repeater, it is very important
to make sure the screws are tightened
firmly to preserve the sealing of your
repeater. Failing to do so can negatively
impact the repeater’s IP55 water and
dust resistant feature.
Important