Motorola RPU2160, Инструкция по установке и эксплуатации

Страница: 57 / 80

PROGRAMMING Y
O
UR
RADIOS
45
User Guide
• Make sure the TX frequency and PL Code in
the radio channel that has been chosen for
repeater, is the same as the RX frequency in
the repeaters. Same for the RX frequency in
your RDX radio: make sure it matches the TX
frequency and PL code in the repeaters
channel.
• The repeaters have 16 channels available,
each one with two TX/RX frequency pairs.
You can either use the repeater default
programmed frequencies and customize the
RDX channels to match the repeater’s or you
can customize the repeater frequencies to
different frequencies pairs to match frequency
in the RDX radios.
Note: Take into account that when matching
channel frequencies between the repeater
and the radios, you must also need to make
sure all other channel parameters (i.e.
codes, bandwidth and reverse burst) are at
the same correspondent values in order for
the radios-repeater communications to take
place properly.