Motorola ML1100 Скачать руководство пользователя

Страница: 8 / 35

18. Use caution when installing or modifying telephone lines to prevent electrical shock and/

or fire.

19. Under the following conditions, unplug this product from the wall outlet and refer servicing

to qualified service personnel:

(a) The power supply cord or plug is damaged or frayed.

(b) The product has been exposed to rain or water.

(d) The product’s cabinet has been damaged.

(e) The product exhibits a distinct change in performance.

20. Avoid using a telephone (other than a cordless type) during an electrical storm. There may

be a remote risk of electric shock from lightning.

21. Do not use the telephone to report a gas leak in the vicinity of the leak.
22. Do not place this product on an unstable cart, stand, or table. The product may fall,

causing serious damage to the product.

23. Only use attachments/accessories specified by the manufacturer.
24. Unplug this apparatus during lightning storms or when unused for long periods of time.

Save these instructions

Battery Safety Instructions

IF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING ADDITIONAL PRECAUTIONS

SHOULD BE OBSERVED:
1.  Use only the type and size battery(ies) specified in the user manual.
2.  Do not use this product if the battery door is removed or missing.
3.  Replace batteries that appear to be swollen or have damaged wiring.
4.  Do not dispose of the battery(ies) in fire. They may explode. Check with local codes for

possible special disposal instructions.

5. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause

damage to the eyes or skin. It may be toxic if swallowed.

6. Exercise care in handling battery(ies) in order not to short out the battery(ies) with

conducting materials such as rings, bracelets, and keys. The battery(ies) or conductor may

overheat and cause burns.

7. Do not attempt to recharge the battery(ies) provided with or identified for use with this

product that are not rechargeable. The battery(ies) may leak corrosive electrolyte

or explode.

8. Do not attempt to rejuvenate the battery(ies) provided with or identified for use with this

product by heating them. Sudden release of the battery(ies) electrolyte may occur causing

burns or irritation to eyes or skin.

9. When replacing battery(ies), all batteries should be replaced at the same time. Mixing fresh

and discharged batteries could increase internal cell pressure and rupture the discharged

battery(ies). (Applies to products employing more than one separately replaceable

primary battery.)

10. When inserting battery(ies) into this product, the proper polarity or direction must be

observed. Reverse insertion of battery(ies) may result in leakage or explosion.

11. When inserting battery(ies) into this product, do not twist or pinch the wires or allow wires

to become pinched in battery door.

12. If storing over 30 days, remove battery(ies) from this product because the battery(ies)

could leak and damage the product.

13. Discard “dead” battery(ies) as soon as possible since “dead” batteries are more likely to

leak in a product.

Содержание ML1100




































Результаты поиска

Содержание ML1100

Отзывы:

Похожие инструкции для ML1100

Бренды по названию

Популярные бренды

Motorola ML1100, Полное руководство пользователя

Результаты поиска

Содержание ML1100

Отзывы:

Похожие инструкции для ML1100

Бренды по названию

Популярные бренды