Motorola MK1200, Руководство по продукции

Страница: 151 / 232

Appendix B RF Network Configuration
Introduction
There are two alternative platform partitions available for the MK1250 (WinCE 4.2 OS v3.0.0 Platform
1150c42Plat32M301.hex) that enable different RF clients to configure the 11 Mbps wireless connection.
• To implement WPA enterprise-level wireless security in the wireless connection, use the Aegis Client version
2.1.4 to configure the wireless connection.
• Alternatively, use Symbol Mobile Companion version 3.9.3.76.
Automated Launch of Aegis Client
By default, the Aegis Client launches at startup and runs in the background on MK1250s using platform
partition 1150c42Plat32Mxxx.hex.
The AegisEnable.reg file included in this partition enables this. Deleting this file or renaming its .reg extension
causes Mobile Companion to launch upon boot up . In this case, to access Aegis Client double-tap its desktop
icon or press all four of the MK1250’s buttons simultaneously. The Aegis Client icon then appears in the task bar;
select this to display its configuration window.
To close the Aegis Client window but continue to run the application in the background, select
Client
tab >
Close
. To
exit the application completely, select
Client
tab >
Exit
.
NOTE Mobile Companion supports WPA Home, but not WPA Enterprise.
NOTE To use Mobile Companion on an RF unit, you must first disable Aegis Client or conflicts can occur.