User Guide
Designer Reference Manual
DRM028 — Rev 0
146
User Guide
MOTOROLA
Running state, or has a low start-up torque, DO decrease or increase
the
PER_CMT_START_US
value.
Table 6-2
shows typical setting
examples.
Must be:
PER_CMT_START_US<=PER_CMT_MAX_US/2
NOTE:
Setting this constant is an empirical process. It is difficult to use a precise
formula, because there are many factors involved which are difficult to
obtain in the case of a real drive (motor and load mechanical inertia,
motor electromechanical constants, and sometimes also the motor
load). So they need to be set with a specific motor.
PER_CMT_START_US
can be evaluated with PC master software
tuning file tuning_bldc.pmp.
Maximal commutation period limit [
µ
s]:
/* CAN_CHANGE_6_EXPER: */
#define PER_CMT_MAX_US 65536.0
Range: <0,65535*UNIT_PERIOD_T2_US>
Usually it is not recommended to change
PER_CMT_MAX_US
. The
change is only necessary if the commutation period at start-up is to
long.
Alignment to Start Increment of the regulators output [-]:
/* CAN_CHANGE_7_EXPER: */
#define START_INCR_OOUTREG 20.0
Range: <-128,127>
Table 6-2. Start-up Period
Motor Size
Typical
PER_CMT_START_
US
First-to-Seco
nd
Commutation
Step Period
Second-to-Thi
rd
Commutation
Step Period
Slow motor/high load and
motor mechanical inertia
8000.0
µ
s
8 ms
8–16 ms
Fast motor/high load and
motor mechanical inertia
2000.0
µ
s
2 ms
2–4 ms
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..
