Motorola LXN 500, Руководство по установке, настройке и эксплуатации

Страница: 14 / 66

MN003563A01-B
Overview
14
Send Feedback
6 RADIO RADIO is a status LED used to diagnose and troubleshoot the eNodeB transceiver that
enables the LXN 500 to communicate directly with end-user devices.
Refer to
Troubleshooting and Maintenance whenever the LED shows orange or red color.
LED OFF - OFF
GREEN - L1 and L2 and L3 are running
BLINKING GREEN - Startup eNodeB startup in progress
ORANGE - One or more eNodeB processes are down and one or more are active
BLINKING ORANGE - eNodeB Shutdown in progress
RED - Failure - L1, L2, and L3 are down
BLINKING RED - Fatal Error - No connection to eNodeB board
7 1 USB 2.0 port for connecting peripheral devices such flash-disks to the LXN 500. The USB
port is covered by a protective cover.
IMPORTANT
- To enable a successful boot-up, remove all USB devices connected to the
LXN 500 before powering on.
- The LXN 500 supports only FAT32 file system disks.
NOTE
To ensure proper communication, use USB extension cable shorter than 9.8 feet
(3 meters).
8 2 USB 2.0 port for connecting peripheral devices such flash-disks to the LXN 500. The USB
port is covered by a protective cover.
IMPORTANT
- To enable a successful boot-up, remove all USB devices connected to the
LXN 500 before powering on.
- The LXN 500 supports only FAT32 file system disks.
NOTE
To ensure proper communication, use USB extension cable shorter than 9.8 feet
(3 meters).
Table 1-1
Features of LXN 500 Front Panel (Continued)
Item Description