Motorola LXN 500, Руководство по установке, настройке и эксплуатации

Страница: 30 / 66

MN003563A01-B
Operation and Configuration
30
Send Feedback
Setting the eNodeB
The eNodeB is the part of the LXN 500 that sends and receives radio transmissions and signaling from
and to the mobile devices. The eNodeB process the LTE analogue and digital over-the-air interface
signals.
Perform this procedure to configure the eNodeB.
Procedure:
1.
Sign in to the LXN 500 O&M Configuration site (See Signing In on page 20 ).
2.
Click the eNodeB tab.
Result: The eNodeB screen is displayed.
Figure 2-11
eNodeB Screen
3.
In the Bandwidth field, select the required bandwidth.
Table 2-3
eNodeB Band Configuration
Band Bandwidth (MHz) Uplink / Downlink Frequency Range
14 5, 10 UL:788 - 798, DL: 758 - 768
20 5, 10, 20 UL: 832 - 862, DL: 791 - 821
28 5, 10, 20 UL: 723 - 748, DL: 778 - 803