Motorola DSR4410 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 76

Motorola DSR4410 Скачать руководство пользователя страница 45

DSR4410

39

Operating the DSR4410

Group 3 Menus: Status Display

Status display menus provide information regarding the current status of the unit. They
group together important parameters and display them conveniently together for the user to
review the receiver's operation. These fields are not editable, and the displayed information
is either (1) the result of changes in an installation or channel selection menu, or (2) a
parameter the unit reports as part of its operation.

Status1 Menu

Press the

56

buttons until the Status1 menu appears.

Front Panel Field

The Front Panel field indicates whether the user is able to control the IRD completely from
the front panel or whether some front panel functions are disabled.

Input Type Field

The Input Type field indicates the input connector on which the active signal is received.

Status2 Menu

Press the

56

buttons until the Status2 menu appears. This screen displays the source

name, channel number, and the signal quality.

Source Field

The Source field displays the source name, which was entered by the programmer or
network operator at the encoder/uplink to identify the source. Dashes are displayed when
no information is available.

Channel Field

The Channel field displays the selected virtual channel number (from the Channel menu).
Dashes are displayed when no information is available.

E Local Control L-Band

J

STATUS1 FrontPanel Input Type

E aaaaaaaaaaaa dddd ddd

J

STATUS2 Source Channel Quality

«
...
43
44
45
46
47
...
»

Содержание DSR4410













































































Отзывы:

Нет отзывов