Motorola DSR4410, Руководство оператора, Страница: 37 / 76

DSR4410 31
Operating the DSR4410
Group 2 Menus: Channel Selection
Channel Menu
Press the 56 buttons until the Channel menu appears. This menu allows the user to select
an active VCT, select the virtual channel, and view the name of the current transponder.
The DigiCipher II system allows for retune events in which a programmer sends
over-the-satellite messages to specified receivers to change the service they output for a
specified time period, then return to a specified service. During a retune event, the user is
locked out from editing this menu to ensure that the receiver does not get lost when
returning from the retune event.
VCT Field
This field allows selection of a virtual channel table (VCT) number. (Review the section
entitled
Changing Networks/VCT.) Please contact the program provider for the correct
VCT number to enter for that commercial system. Press the 4 button until the cursor is at
the VCT label, and press the Enter button to move into the field. While insuring that the
cursor remains on the up/down symbol, press the
56 buttons to scroll throughout the
available VCT’s. (If the network has four VCT’s, then only four VCT’s will appear in this
field.) Press the Enter button to confirm the selection.
This field also provides a second method for selecting the VCT: Use the 34 buttons to
select the digit to change and then, while the cursor is on that digit, press the 56 buttons to
display the required value. Repeat for each applicable digit.
A warning message is displayed when a VCT is selected which does not exist.
Press a directional ( 3456 ) button to back out of the field and leave it unchanged.
Otherwise, press the Enter button to proceed.
Channel (Chnl) Field
The Channel field allows selection of the virtual channel for the output service. Channels
that do not exist will appear within parentheses, for example (346). Virtual channel options
within the table range from 000 to 999. Press the
4 button until the cursor is at the Chnl
label, and press the Enter button to move into the field. While insuring that the cursor
remains on the up/down symbol, press the
56
buttons to scroll throughout the available
virtual channels. (If the chosen VCT contains twenty-four virtual channels, then only
E ddddd dddd aaaaaaaa
J
CHANNEL
J
VCT
J
Chnl Xpndr
Press E to continue or to stop
CAUTION: VCT dddd not present in unit