Motorola DSR4410, Руководство оператора, Страница: 21 / 76

DSR4410 15
Operating the DSR4410
of the menu. If Port 0 or Port 1 is selected, then move to the Mode field, Xpndr field or
Lfreq field. These fields are not visible when ASI In is selected.
The following Caution screen will appear, asking the user to confirm the selection.
If you press any
3456
button at this point, the Caution screen will disappear and the
ManualTune menu will reappear without any changes. But, to make a selection, press the
Enter button to set the port selection.
Mode Field
The Mode field allows selection of the frequency plan type for the satellite to which the
unit is tuned. If the application is a North American C-band satellite, use the Xpndr, and
then select the transponder number in the Xpndr field. Otherwise, use the L Freq option
and the LFreq field. The L Freq option can be used for all satellites, including current
C-band, Ku-band, and future satellites where the frequency plans are unknown at the time
of receiver manufacture.
Press the
4
button until the cursor is on the Mode label. Then press the Enter button to
move into the field. There are two choices, Xpndr or L Freq. Press the
56
buttons to
display the choice. Then press the Enter button to confirm the selection.
If Xpndr is selected, choose a transponder in the Xpndr field. The frequency in the LFreq
field will be set automatically based on internal transponder tables.
If L Freq is selected, dashes (--) will appear in the Xpndr field since the transponder/
frequency relationship is not known. Select a transponder frequency between 950 and 2150
MHz in the LFreq field. The user will not be able to select a transponder in the Xpndr field.
The default setting is Xpndr. This field is not available when the ASI In option in the Input
field is selected.
Xpndr Field
This field allows selection of an initial satellite transponder number and can only be used if
the Xpndr option in the Mode field is chosen. The Xpndr field cannot be edited if L Freq in
the Mode field has been chosen. Press the
4
button until the cursor is at the Xpndr label.
Then press the Enter button to move into the field. Since this is a real-time field, the
Caution screen will appear to confirm that the value for this field is changing. Press a
3456
button to leave this field unchanged and back out of it. To edit this field, press
the Enter button again to continue.
Press E to continue or to stop
CAUTION: Service will be interrupted