manualshive.com logo in svg

Motorola DSR4410, Руководство оператора, Страница: 38 / 76

Поделиться
Скачать
Motorola DSR4410 Скачать руководство пользователя страница 38

3

32 

twenty-four virtual channels will appear in this field.) Press the Enter button to confirm the 
selection.

This field also provides a second method for selecting the virtual channel: Use 
the

34

buttons to select the digit to change and then, while the cursor is on that digit, press 

the

56

buttons to display the required value. Repeat for each applicable digit.

The unit displays warning messages for the following conditions.

• A warning message is displayed when the user changes from a virtual channel to a 

MPEG program number.

Press a directional (

3456

) button to back out of the field and leave it unchanged. 

Otherwise, press the Enter button to proceed.

• If the user selects a virtual channel that is not in the chosen VCT, then a warning 

message, “Not in map,” is displayed to the right of the virtual channel.

Then, if the user subsequently presses the Enter button, another warning message is 
displayed.

Note:  The above warning message is only displayed when the user changes the 
channel from a valid virtual channel to a nonexistent virtual channel. This message is 
not displayed if the unit is not already acquired to a virtual channel as would be the 
case when setting up the unit for future operation. In this example, then, the unit is pre-
configured with a virtual channel before the unit is installed.

• Virtual channels identify satellite and polarity attributes. The RF input ports are setup 

with satellite and polarity attributes; refer to the Port0 Setup and Port 1 Setup menu 
description. The unit uses these satellite and polarity attributes to determine which RF 
port to use. However, if the user selects a virtual channel that does not match the 
satellite and polarity attributes of either port, then the unit will be unable to determine 
which port to use and the following warning message is displayed.

Press E to continue or    to stop

CAUTION: Changing to DCII selection mode

   E         ddddd   dddd  (Not in map)

J

CHANNEL   

J

VCT   

J

Chnl   Xpndr

Press E to continue or    to stop

CAUTION: Channel dddd not present

Содержание DSR4410













































































Отзывы:

Нет отзывов