Motorola Dimetra MTM300 Скачать руководство пользователя | Manualshive

Страница: 54 / 58

background image

46

Motorcycle Installation

The DC power cable shipped with the mobile radio is long enough for installation. Begin
the power cable installation in the following manner:

1.

Determine a routing plan for the power cable from the motorcycle box to the
motorcycle’s battery.

High degree of care should be exercised not to damage any existing vehicle wires.

2.

Locate the nearest available vehicle chassis ground mounting point and shorten the
black lead to remove excess cable length.

3.

Install ring lugs (supplied) onto stripped end of power cable black lead, and onto
stripped end of red lead on fuse holder (see Figure 51).

4.

Locate the fuse holder as close to the battery as possible and away from any hot
engine component. Mount the fuse holder using the provided mounting hole and
dress wires as necessary. Connect the fuse holder red adaptor lead plug to the mating
receptacle on the red lead of the power cable (see Figure 51).

5.

Connect the power cable black lead directly to the vehicle chassis ground.

6.

Connect the power cable red lead from the fuse holder to the positive (+) battery
terminal. Make sure the adaptor cable is connected to the main power cable red lead.

7.

Plug fuse into in-line fuse holder (see Figure 51).

Failure to mount the red lead of the power cable kit directly to the battery may result in
severe alternator whine interference.

Figure 51 Power Cable Assembly

Microphone Installation

See the instructions supplied with the microphone for complete installation information.

When connecting the various microphones available, make sure to attach the “S Hook”
provided on the microphone cable to the trunnion.

!

C a u t i o n

Note

Fuse

Cover

Red Lead

Red Lead

Mounting

Hole

Molded In-Line

Fuse Holder

To Vehicle

Chassis Ground

To Battery (+)

Adapter

Red Lead

Black Lead

Ring

Lugs

«
...
52
53
54
55
56
...
»

Содержание Dimetra MTM300



























































Отзывы:

Нет отзывов

Похожие инструкции для Dimetra MTM300

Бренд: Hama Страницы: 120

Бренд: Xoro Страницы: 50

Бренд: B & G Страницы: 92

Бренд: Raymarine Страницы: 130

Thor 1 TP9000EX

Бренд: TP Radio Страницы: 20

Бренд: B&B Electronics Страницы: 2

Бренд: Sangean Страницы: 31

Бренд: Grundig Страницы: 162

Бренд: Salora Страницы: 17

Бренд: Eaton Страницы: 83

Бренд: Roberts Страницы: 8

Бренд: Vertex Standard Страницы: 6

Бренд: Kenwood Страницы: 9

FM Transceiver TK-481

Бренд: Kenwood Страницы: 2

Бренд: Kenwood Страницы: 42

FM Transceiver TK-481

Бренд: Kenwood Страницы: 55

Бренд: Kenwood Страницы: 10

Бренд: Kenwood Страницы: 136

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды