H4 Multisensor and H5A Dualhead Dome
Cameras
Avigilon H4 Multisensor and H5A Dualhead Dome cameras use the same settings as the other cameras
referenced in this guide, with the exception that these settings are multiplied by the number of heads on the
camera. You can configure the settings for each head on the camera individually.
When you see the camera's video display, you will see either two, three or four image panels displayed —
one for each head on the camera:
The top-left image panel is always for Head 1. The odd numbered heads are displayed on the left, and the
even numbered heads are displayed on the right.
To control the video display:
l
Click on an image panel then use the zoom and focus controls to adjust the video image.
l
Move your mouse into the image panel then click
to maximize the image panel. Click
to
restore the image panel.
Changing Settings Per Camera Head
When you adjust the video image settings, you will typically see a tab for each camera head. To change
settings for a specific camera head, select that head's tab on the settings page and make the required
changes.
If no tabs are displayed, the settings apply to the camera as a whole.
The
All Heads
tab is only displayed on the Image and Display, Adjustments, and Motion Detection pages.
The
All Heads
tab on these pages allows you to change settings that apply to the whole camera and
settings that can apply to specific camera heads.
H4 Multisensor and H5A Dualhead Dome Cameras
47
