Note:
The configured prefix length may not display correctly in the web interface, but
the prefix used by the camera will be the configured length.
d. In the
Default Gateway
field, enter the Default Gateway you prefer to use. You can only assign
a Default Gateway if RA is disabled.
The IPv6 addresses that can be used to access the camera are listed under the
Current IPv6
Addresses
area.
4. If you need to customize the hostname, enter it in the
Hostname
field.
5. In the DNS Lookup area, select how the camera will obtain a Domain Name System (DNS) server
address.
l
Obtain DNS server address automatically
: select this option to automatically find a DNS
server.
l
Use the following DNS server addresses
: select this option to manually set DNS server
addresses. You can set up to three addresses:
l
Preferred DNS server
: assign the address of the preferred DNS server in this field.
l
Alternate DNS server 1
: (optional) assign the address of an alternate DNS server to this
field. In the case that the preferred server is not available, the camera will attempt to
connect to this server.
l
Alternate DNS server 2
: (optional) assign the address of another alternate DNS server
to this field. In the case that both the preferred server and the first alternate server are
unavailable, the camera will attempt to connect to this server.
6. In the Control Ports area, you can specify which control ports are used to access the camera. You can
enter any port number between 1 and 65534. The default port numbers are:
l
HTTP Port
: 80
If you want to limit camera access to secure connections only, clear the
Enable HTTP
connections
check box. HTTP Port access is enabled by default.
l
HTTPS Port
: 443
l
RTSP Port
: 554
l
RTSP Replay Port
: 555
7. In the NTP Server area, indicate if you want the camera to use an NTP server to keep time.
1. Select the NTP source to use for keeping time:
l
Always use Avigilon Control Center NTP Server
. Select this option if you want the
camera to keep time through the Avigilon Control Center™ software only.
l
Always use external NTP server
. Select this option if you want to use an external NTP
server only. Then configure the NTP server to use.
l
Use Avigilon Control Center Server with a failover external NTP
. By default, Avigilon
cameras keep time through the Avigilon Control Center software and will use an
external NTP Server when not connected to an ACC server, if one is configured.
Network
12
