KVM25 specifications
are as follow:
KVM25 dimensions are the following:
▷ Power Supply
▷ Power
▷ Current
▷ Operating temperatures
▷ Transformer
▷ Work Rate
▷ Noise level
▷ Force
▷ Fuses
▷ RPM
AC 230V 50/60Hz
80W
8A
-30°C a 65°C
100W
30ciclos / h
▷ Protection class
IP20
<65dB
30N
220V 1A - 24V 10A
20 RPM
KVM25
For a proper installation and a durable performance of KVM25, be aware of the follow-
ing parameters:
▷ Please read all steps of this manual at least once, so that you know the full process
before starting the real assembling.
▷ This equipment can only be installed on sectional doors with a maximum area of
18m2.
▷ Please make sure that the door’s structure is solid and in good conditions to be
automated.
▷ Make sure that the sectional door has no mechanical anomalies, they may affect the
automatism’s durability .
▷ To check if the door is in good condition for the motor to be installed, manually raise it
to 800mm, 1600mm and 2000mm from the floor and drop it.
The door must remain suspended in that position or going down very slightly.
If this does not happen, check the springs condition.
▷ Check the surrounding space. Carefully evaluate potential dangers that can cause
physical damage and possible contact with bugs, infiltrations or others.
▷ Please make sure that the automatism will be connected to a 230V power supply,
protected with earth wire.
▷ Please check if there is apropriate electronic protection against short-circuits/current
peaks, and earth wire on the main electric board.
▷ Be carefull in case of manually operating the control board. The incorrect usage can
damage some sensible electronic components.
▷ Check if you have all the necessary material ready for the installation.
▷ Check all safety devices to install. This will ensure that unexpected accidents won’t
happen.
03
.
THE AUTOMATISM
▷ TECHNICAL SPECIFICATIONS
PRE-INSTALLATION INFO ◁
04
.
INSTALLATION
03.A
03.B
It is very important that before installation, make sure the springs are adjusted
according to the door’s weight!
320mm
110mm
186mm
