8
12
13
14
15
16
17
18
19
20
21
22
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
1
2
3
4
5
6
7
8
9
10
11
EN
02. CONNECTION SCHEMES
DOOR WITH 2 LEAVES
When using a kit of two sheets:
1 -
LED 2 of both switches must be ON
.
2 -
When the door input is set to leaf 1, LED 1 must be ON and LED
1 of the opposite panel must be OFF.
3 -
Leaf 1 will open first than leaf 2. When closing, the maneuver is
carried out simultaneously by the two leaves.
4 -
The 2-leaf and interlocking-leaf systems cannot be used,
otherwise the two automatic doors will not work correctly.
Combination to turn on LED's
To turn on/off any of the LEDs, you must be pressing the
combinations while connecting the control board to the power
supply:
LED 1 -
Button
+
with Button
-
LED 2 -
Button
SET
with Button
+
Operation:
When using a door with two leaves, you should note these connections.
This function will allow the two sheets work in a coordinated manner.
All connections must be made with the power supply disconnected.
In this function, if the leaf nº2 encounters an obstacle during closure, the micro
will give opening order to the 2 leaves automatically, to ensure that the closure
will be done correctly.
Leaf nº2
Leaf nº1
Control board 1
Control board 2
DOOR 1
LED 1 ON- Master
DOOR 1
LED 2 ON - 2 doors ON
DOOR 2
LED 1 OFF - Slave
DOOR 2
LED 2 ON - 2 doors ON