© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
REVISION 5-20-21
www.motorcitywashworks.com
34
Check amperage that
the 10HP motor is
pulling.
Check continuity of
3phase motor leads,
including ground.
Profiler Dryer
Not drying car fully.
Make sure a drying
agent is being used to
fully utilize your drying
space.
Consult Air One or
Profiler Dryer manuals
for approximate
recommended
housing angles.
Ensure there is no
debris covering the
inlet screens of the
dryers.
Profiler Dryer
Motor drawing too
much amperage.
Check to see that
motor is wired for
correct voltage
configuration for
incoming 3phase
power.
Listen for faulty motor
bearing.
