© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
REVISION 5-20-21
www.motorcitywashworks.com
18
Installing the Control Box:
After
the control box is secured properly, pull the grey
“EMITTER PHOTO-EYE CABLE”
behind the control box
and then up through the cross beam towards the driver’s side and down the leg. Finally, pull each individual cable
terminated at the end of the main cable and connect each one of them to each photo-eye (see picture #29).
Using
plastic ties, secure the cable in the cross beam as shown in picture #30.
Pic #29: Photo-Eye Cable Pic #30: Plastic Mounts for Zip Ties
Mounting standoffs and
hardware are packaged with the
cables on the control box.
Use mounting holes provided to secure
control box mounting bracket to the
standoffs.
This is mounted on the passenger side of
the profiler arch.
