9.2 Notes on Maintenance Procedures
9-5
HS0481357
HS0481357
9.2.2
Grease Replenishment/Exchange for Tilting Axis
Speed Reducer
Fig. 20 Speed Reducer Diagram
Grease Replenishment (Refer to " Fig. 20 Speed Reducer Diagram
".)
1.
Remove the hexagon socket head plug PT1/8 from the Wo grease exhaust port.
2.
Inject the grease into the Wi grease inlet using a grease gun.
3.
Move the rotary axis for a few minutes to discharge the excess grease.
4.
Wipe the Wo grease exhaust port with a cloth and reinstall the hexagon socket head
plug PT1/8. (Apply the modifier silicon caulk on the thread part of the plug.)
If grease is added with the plug on, the grease will go inside the motor and may damage it.
Never fail to remove the plug before the grease injection.
Grease type: Molywhite RE No.00
Amount of grease: 700 cc
(1400 cc for 1st supply)
Wi: Grease inlet
(Grease zerk A-PT1/8)
Wo: Grease exhaust port
(Hexagon socket head plug PT1/8)
NOTE
