3.2 Mounting Procedures for MOTOPOS Baseplate
3-4
HS0481357
HS0481357
3.2.2
In Case of Mounting the MOTOPOS on the Floor
The floor should be strong enough to support the MOTOPOS. Construct a solid foundation
with the appropriate thickness to withstand maximum repulsion forces of the MOTOPOS as
shown in " Table 1 Maximum repulsion forces of the MOTOPOS ". As a rough standard, when
there is a concrete floor thickness of 200 mm or more, a baseplate (MOTOPOS baseplate
thickness of 36 mm or more) can be fixed directly to the floor with anchor bolts M20. Before
mounting the MOTOPOS on the floor, check the flatness, cracks, etc. of the floor. If there are
any cracks and the like on the floor, they should be repaired before installation. Any thickness
less than 200 mm is insufficient for mounting, even if the floor is concrete.
Fig. 4 Fixing the MOTOPOS on the Floor
1000
900
465
1000
900
485
200 or more
36 or more
Anchor bolt M20 (4 places)
Hexagon head screw M20 (length: 70)
(4 places) with washer M20 and spring
washer M20
Drilled hole: 24 dia. (4 holes)
MOTOPOS base
Baseplate
Tapped hole M20 (4 holes)
Bolts and baseplate should be prepared by user.
Concrete floor
Units: mm
