background image

16.3   EG-Konformitätserklärung (CE)

 

EG-Konformitätserklärung 
Gemäß EG-Richtlinie für EMV (89/336/EWG) 
 
Der Hersteller: 

motogadget GbR 
Simplonstr. 59 
D-10245 Berlin 
 

erklärt hiermit, dass das nachstehend beschriebene Gerät 

Fabrikat:  Multifunktionsanzeige für Kraftfahrzeuge 
Typ: motoscope 

mini 

 

 

übereinstimmt mit den Bestimmungen folgender EG-Richtlinien: 

EMV - Richtlinie 89/336/EWG 
Niederspannungsrichtlinie 73/23/EWG 
 

Angewendete Normen und technische Spezifikationen: 

 

EN 50227:1997, Steuergeräte und Schaltelemente – Näherungssensoren – 
Gleichstromschnittstellen für Näherungssensoren und Schaltverstärker 

 

EN 55022:1987, Elektromagnetische Verträglichkeit von Einrichtungen der 
Informationsverarbeitungs- und Kommunikationstechnik – Grenzwerte und Messverfahren für 
Funkstörungen von informationstechnischen Einrichtungen 

 

EN 60051-1:1998, Direkt wirkende anzeigende elektrische Messgeräte und ihr Zubehör – 
Messgeräte mit Skalenanzeige –  
Teil 1: Definitionen und allgemeine Anforderungen für alle Teile dieser Norm 

 
Berlin, den 30.05.2006 
 
Dipl.-Ing. (FH) Garrit Keller  
Technischer Leiter 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

13 

Содержание motoscope mini

















Отзывы: