12.2.6 Aback (auto back)
This function controls the elapsing time after which the current indication jumps back to the
driving speed indication. If the value is set to "00 s" the function is deactivated. In order to
select individual digits representing the chosen time engage the pushbutton for time stage 1
(one bar). In order to go to the next digit push the button for time stage 2 (two bars). To leave
the level operate the pushbutton for time stage 3 (three bars).
12.2.7 VertM (vertical mode)
If the instrument shall be mounted in a vertical position, the function
VertM
makes it possible to
rotate all characters shown on the display by 90 degree (vertical mode).
Within the submenu you can choose between the options “off”, “left” and “right”.
The option “off” activates the standard horizontal mode, “left” activates the vertical mode with
the rev. counter bar on the left side and “right” activates the vertical mode with the rev. counter
bar on the right side.
12.3 The level " RESET "
Under
RESET
all or individually selected values can be set to 0 or to their default values.
Furthermore, the total odometer reading can be set to an individual value (e.g. to the former
odometer reading). Within the level
RESET
the sub-points "
odo
" and "
all
" can be chosen.
12.3.1 Odo (Odometer)
The sub-point "
ODO
" allows the adjustment of the total odometer reading. In order to scroll
through the digits, engage the pushbutton for time stage 1 (one bar). To move to the next
number position engage the button for time stage 2. To leave the sub-point engage the button
for time stage 3.
12.3.2 All
Within the function "
ALL
" all adjustments and entered data will be deleted, including the total
odometer readings, and the default values will be restored!
!Important!
If this function is activated the following should be considered:
Engaging the pushbutton for time stage 2: Deletes everything and leaves the menu.
Engaging the pushbutton for time stage 3: Leaves the menu without deleting anything.
13 Cleaning of the instrument
Use only gentle, non-corrosive detergents and a soft cloth for cleaning the
motoscope mini
.
Avoid anything that might scratch the aluminium housing and the display surface. Should any
scratching occur, we recommend special polishing pastes in order to remove them from the
display. Such pastes can be found, for example, in equipment stores for mobile telephones.
Furthermore, we suggest the use of silicon spray from time to time. This keeps the colour of
the anodised housing fresh and protects the instrument from dirt.
10
