AGITO
30
www.Motion-Impossible.com
Motion Impossible Ltd.
AGITO Owners’ Manual v1.3 Firmware r4.13
30
+44 1454 501010
ADJUSTING / TUNING V-CON PRO
Turn the payload adjustment knob on the front of the V-Con PRO to adjust the
preload on the springs. The amount of preload you give depends on the
weight of the payload.
Ensure it rests in the middle of the travel. Giving it room to move up and
down, as shown below.
Adjust the dampener ring to change the responsiveness of the return
movement. Rougher surfaces generally require a softer return.
Too High
Correct
Too Low
ADJUSTING SUSPENSION – SPORTS DRIVE-ENDS
It is very important to adjust your suspension according to the system total
weight. Incorrectly setup suspension can cause handling problems and
stability issues.
To adjust the suspension you twist the preload, moving it up or down
depending on weight. Up for lighter loads and down for heavier loads until
the lower wishbones are horizontal, as shown below.
Too High
Correct
Too Low
While twisting the preload make sure you don’t unscrew the shock cap
from the main shock body.
