AGITO
15
Motion Impossible Ltd.
www.Motion-Impossible.com
+44 1454 501010
15
AGITO Owners’ Manual v1.3 Firmware r4.13
6.
MASTER CONTROLLER OVERVIEW
OPERATIONAL CONTROLS LAYOUT
DEFINITIONS
THROTTLE INPUT
:
Gives forward, reverse & brake in one control. When applying brake, i.e. opposite
throttle to the direction you are currently moving, you are forcing the chassis to stop with 100%
deceleration.
Whilst in the menus the throttle also functions as an up/down control.
SPEED LIMIT
- Maximum speed limit:
This control is located on the top left corner and can be operated
during a movement. The throttle input and chassis speed cannot exceed the value set by this control.
The current maximum speed setting is displayed on the LCD. When in the menus it also functions as a
value control. Behind this control on the rear of the MASTER is a button to make a menu selection.
ACC
- Acceleration limit:
Sets the maximum rate of acceleration you can achieve with a full throttle
input. A higher value allows a faster acceleration rate.
DEC
- Deceleration rate control:
Adjusts the coasting brake (when the throttle control is released to
neutral while moving). A higher value increases the rate of deceleration and is recommended for
beginners, a lower
When turning on the MASTER Controller be careful not to press any button other than the power
switch, specifically the Throttle Input. On start-up the controller runs through a calibration process,
if the Throttle Input is not centered then the AGITO may accelerate unexpectedly.
The calibration process finishes when the main menu screen appears.
