6
Manual # 42-02-U001, Rev C1
Installation
For protection during shipping, UPS units are shipped in separate containers from the TAPS
chassis.
Installing and setting up the Traction Auxiliary Power Supply includes:
• Choosing a location
• Power connections and transformer configuration
• TAPS to controller signal connections
• Installing the UPS
• TAPS configuration
Choosing a Location
The TAPS chassis measures
18"H x 24"W x 24"D and is designed to be mounted to a floor or
other horizontal surface using four 3/8” bolts. Please refer to “TAPS Chassis and Mounting
Dimensions" below. For 6 kVA models, a second chassis is needed to house the UPS. This
enclosure measures 34” H x 21 3/8” W x 32 3/8” D and also mounts using four 3/8” bolts.
refer to “6 kVA UPS Chassis and Mounting Dimensions"
.
Figure 3. TAPS Chassis and Mounting Dimensions
24 in
22.5 in
26.5 in
6 in
6 in
24 in
12 in
18 in
24 in
Содержание TAPS
