Motion Concepts MPS MAXX MPSS Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 88

Motion Concepts MPS MAXX MPSS Скачать руководство пользователя страница 63

- 63 -

The belt is designed to control the tension of the CM Legrest during articulation/ extension. Following an
extended period of use, some minor stretching of the belt may occur; A belt adjustment may be necessary
to tighten any noticeable slack or looseness in the belt. (Please read

Important!

note below). To increase

tension on the belt tighten the belt adjustment bracket, on the underside of the seat frame, by rotating the
bolt clockwise.

IMPORTANT!

• The legrest belt is factory pre-set during
installation; We strongly recommend that
belt adjustments only be performed by a
Qualified Technician, if necessary.

• Belt inspection should be performed as
part of the routine maintenance of the Rovi-
MPS System.

• If you notice a significant loss of tension

in the legrest belt, please contact your local
Dealer to arrange for a belt inspection and
adjustment.

Belt

Adjustment

Bracket

To increase tension, rotate
adjustment bolt clockwise

5.12 CENTER MOUNT LEGREST BELT ADJUSTMENT/ MAINTENANCE:

5.0

5.0

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

«
...
61
62
63
64
65
...
»

Содержание MPS MAXX MPSS

























































































Отзывы:

Нет отзывов