Motion Concepts MPS MAXX MPSS Скачать руководство пользователя страница 27

Страница: 27 / 88

- 27 -

DRIVE MODE:

The ROVI RNet remote joystick functions as the wheelchair drive control when the joystick is set to one of the
available

Drive Profiles

(Drive Mode)

There are 5 pre-programmed drive profiles to choose from on the RNet

LCD Joysticks. To scroll through the available drive profiles, press the

Profile Button

(

) on the joystick remote

-see

Fig.1a/1b

. The drive profiles are factory pre-set for specific driving conditions

(e.g.; ramp/curb speed,

indoor speed, outdoor speed, etc...)

, but may be reprogrammed if necessary by a qualified technician. The

speed within each pre-set drive profile can be further adjusted by pressing the

Speed Adjust

button on the

joystick remote (

IMPORTANT!

The following section covers instructions for basic wheelchair drive controls. Please be

certain to read the

RNET Remote /Joystick Manual

and/or the

ROVI Powerbase Owner’s Manual

(provided separately)

for more detailed safety, operating and troubleshooting instructions

3.2.3 WHEELCHAIR DRIVE CONTROLS:

WARNING! Risk of Death, Serious Injury, or Damage

An improperly connected joystick could cause loss of power resulting in death, serious injury,
or damage.

•

Ensure the joystick harness is securely connected to the controller

DANGER! Risk of Death, Serious Injury, or Damage.
A malfunctioning joystick could cause unintended/erratic movement resulting in death, serious
injury, or damage.

•

If unintended/erratic movement occurs, stop using the wheelchair immediately and contact a qualified technician

DANGER! Risk of Death, Serious Injury, or Damage

Do not attempt to operate an attendant control joystick with it removed from the seating system
as it could be dropped or be disorienting to operate.

•

To prevent unsafe operating conditions, ensure the attendant control joystick remains in place on the

seating system when operating/driving the wheelchair.

3.2.2 RNET LCD ADVANCED JOYSTICK FEATURES:

LCD Display

(Drive Mode

)

Power on/off

(and optional mode select)

Horn

Hazard Lights

(on/off)

Base Lights

(on/off)

Mode Select

Profile Select

(Drive Profile)

Turn Signal

(right)

Turn Signal

(left)

(Joystick Drive Control)

Speed Adjust

(Joystick Seat Control)

scroll/select

operate PPS

function

Joystick Knob

LCD A

DVANCED

OYSTICK

(comes standard with Base Light controls)

3.0 PROGRAMMING

AND

OPERATING

YOUR

ROVI-MPS SYSTEM

LCD Display

(Seating Mode

)

Содержание MPS MAXX MPSS

























































































Результаты поиска

Содержание MPS MAXX MPSS

Отзывы:

Motion Concepts MPS MAXX MPSS, Руководство пользователя, Страница: 27 / 88

Результаты поиска

Содержание MPS MAXX MPSS

Отзывы: