Motion Concepts MPS MAXX MPSS Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 88

Motion Concepts MPS MAXX MPSS Скачать руководство пользователя страница 45

- 45 -

WARNING! Risk of Death or Serious Injury if the Maximum Recommended Limits are Exceeded

• Safety Lockouts and Limit Switches may only be adjusted by a Qualified Technician, and should
be set up to best meet the needs of the user without compromising the overall stability of the wheelchair.

WARNING! Risk of Serious Injury or Damage.

• Following any limit or lockout adjustments,

always

test the seating system over the full range of motion

(i.e.; tilt, recline, elevate, stand) to verify the revised set-up is functioning properly and ensure that
there are no resulting stability or interference issues.

WARNING! Risk of Serious Injury or Damage.

• ALWAYS ensure the wheelchair base is on a level surface when setting/adjusting safety limits.

4.0

4.0

ELECTRONICS

ELECTRONICS

4.3 Safety Lockouts and Limit Switches

4.3.2 ELEVATE/STAND REDUCED DRIVE SPEED (RDS) LIMIT

The Rovi-MPS system is configured to put the wheelchair into

Reduced Drive

Speed (RDS)

when the seating system begins ELEVATE or STAND function

is activated. The RDS Limit is controlled using a feedback actuator (electronic
limit) to trigger the MPS system into reduced drive speed as soon as the seating
system is raised (elevated or standing) beyond the home position

*

.

Front

Out of

Home

RDS Limit

(for Elevate/Stand)

Tilt DLO

(Angle measured from vertical)

Max. DLO = 30°

Front

Recline DLO

4.3.1 TILT/RECLINE DRIVE LOCKOUT (DLO)

AND

REDUCED DRIVE SPEED (RDS) LIMIT

Both the TILT and RECLINE functions are programmed with a

Drive Lockout (DLO

) Limit to prevent the

wheelchair from being driven when the seating system is Tilted and/or Reclined beyond a pre-determined safe
angle

*

. The DLO limit is configured using a programmable

Tipsy Angle Sensor

(see

section 4.3.4

).

Note:

The Tipsy Angle Sensor also allows programming of a

Reduce Drive Speed (RDS)

limit that will trigger

the wheelchair base to drive at approx. 25-30% of its maximum speed when the back angle extends beyond
a preset angle

*

(between the Home angle and the DLO angle)

. For the Rovi-MPS System, Reduced Drive

Speed is typically set to engage between 10-20° and will stop when the Drive Lockout limit/angle is reached)

Tilt and/or Recline Function (With Reduced Drive Speed):

Max. DLO Angle = 30°

Tilt and/or Recline Function (Without Reduced Drive Speed):

Max. DLO Angle = 25°

Max. DLO = 25°

(if No Reduced Drive)

ELEVATE FUNCTION: RDS Engaged when Elevate/Stand - ‘Out of Home’

*NOTE:

To regain full drive function of the wheelchair, return the seat angle to a more upright position

(when the Tilt/Recline DLO or RDS Limits are activated), or lower the seat to its home (fully retracted)
position (when the Elevate or Stand RDS Limit is activated).

«
...
43
44
45
46
47
...
»

Содержание MPS MAXX MPSS

























































































Отзывы:

Нет отзывов