Motion Concepts MPS MAXX MPSS Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 88

Motion Concepts MPS MAXX MPSS Скачать руководство пользователя страница 40

- 40 -

All Rovi-Multi-Position Stander (MPS) systems come standard with an

M290 Remote Attendant Control,

as part of our standard electronics. The Remote Attendant Control is connected directly into the M-Series
seat control box, and is mounted/located at the rear (back) of the power positioning system. The Remote
has a backlit LCD touch display along with a directional key pad which allows an attendant, or healthcare
provider, to select and operate the power positioning functions on the wheelchair.

*NOTE:

The Remote Attendant Control also functions as a multi-functional hand-held electronics

programming device

.

Access to the program settings for the Attendant Control is password

protected, and restricted to Qualified Technical Service personnel only. For additional information
on programming options and other features available with the Remote Attendant Control, please
refer to

Section 4.0- Electronics

(4.1.2 - Remote Attendant Control)

3.6.1 REMOTE ATTENDANT CONTROL - FEATURE OVERVIEW:

Seat Function

Information

Left/Right Arrows

(Scroll/Select Function)

Settings*

(Password Access)

LCD Touch

Screen Display

(power-off)

TOP

Up/Down Arrows

(Operate Motor Function)

NOTE:

When not in use, the

screen display

on the Attendant Control is designed to enter into sleep

mode after 10 sec. To activate, or re-awaken the Remote Attendant Control, touch the screen display or
press on of the Up/Down function arrows.

Scroll via arrows

(to select seat function:

(i.e.; TILT, RECLINE, ELEVATE, STAND, LEG)

e.g.

TILT FORWARD

e.g.

TILT BACKWARD

3.6.2 OPERATING THE ROVI-MPS SYSTEM

via the

REMOTE ATTENDANT CONTROL

1. Use the

LEFT/RIGHT

touch screen arrows (

1

) to scroll through the available power positioning (motor)

functions (i.e. Tilt, Recline, Elevate, Stand, etc..).

Note

: the remote will only display the power positioning functions that are available

2. Select the desired motor function (on the screen display), then press and hold the

UP/DOWN

arrows (

2

) and

(

3

) to operate the actuator motor. The power positioning function and direction of travel will be indicated on

the display screen

(See example below showing Tilt function)

.

3.6 Operating the ROVI-MPS System - Thru the Remote Attendant Control

IMPORTANT!

The RNet Remote/Joystick MUST be powered on to enable the Remote Attendant Control.

3.0 PROGRAMMING

3.0 PROGRAMMING

AND

AND

OPERATING

OPERATING

YOUR

YOUR

ROVI-MPS SYSTEM

ROVI-MPS SYSTEM

Status Indicator Bar

M290 Remote Attendant Control

1

2

3

«
...
38
39
40
41
42
...
»

Содержание MPS MAXX MPSS

























































































Отзывы:

Нет отзывов