Motion Concepts MPS MAXX MPSS Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 88

Motion Concepts MPS MAXX MPSS Скачать руководство пользователя страница 47

- 47 -

The following tools are recommended to complete the adjustments contained in this manual:

• metric/standard socket set and ratchet
• metric/standard hex key set
• adjustable wrench

Motion Concepts offers a wide range of positioning features/accessories for use with our Modular Power
Standing (MPS) System. The following information is provided as a reference for our typical seating system
configurations. The components/accessories on your wheelchair may differ from those illustrated in this manual.
If you have any questions or concerns related to your specific seating system that are not addressed in this
Owners Manual, please contact your Service Provider or Motion Concepts directly for further assistance.

Once you become familiar with the operation of your power positioning system, you may find a need to make
some basic adjustments to improve your comfort. The following section identifies a variety of features
and adjustment options common to our power positioning systems.

WARNING! Risk of Serious Injury or Damage

• Your seating system has been uniquely configured and installed onto the the power wheelchair base
prior to delivery. There are a limited number of adjustments that can be safely performed by the end user.
To ensure that the adjustments are completed properly, it is preferred to have all adjustments performed
by a qualified technician. If there is an adjustment required that is not indicated in this manual, DO NOT
perform that adjustment. Contact your Service Provider to arrange for service by a qualified technician.

5.0

5.0

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

Headrest Pad

Knee Block Assembly

Chest Bar/Restraint

Power CM Legrest

(Belt-Drive Legrest)

Postural Belt

Chest Strap

Recline Back

Recline Cantilever Armrest

MODULAR POWER STANDING (MPS) SYSTEM

NOT SHOWN:

- Lateral Supports

- Hip Supports

Joystick/Remote

«
...
45
46
47
48
49
...
»

Содержание MPS MAXX MPSS

























































































Отзывы:

Нет отзывов