Motion Concepts MPS MAXX MPSS Скачать руководство пользователя страница 62

Страница: 62 / 88

- 62 -

The angle of the knee block (pads) can be independently adjusted to any desired angle. To adjust the knee
blocks, loosen the clamp assembly (

) and rotate the pad around the cross tube until the desired position is

achieved- see images (

) and (

) below. Re-tighten the clamp assembly to secure the knee block in place

NOTE:

Prior to securing the knee blocks into position, the width (horizontal position) of the knee blocks may

also be adjusted simultaneously- Please see

Section 5.11- Knee Block Width Adjustment

. The

angle and width adjustments are both controlled via the same clamp assembly.

The knee block assembly allows for independent pad width adjustment along the cross tube to achieve the de-
sired leg alignment. To adjust the knee blocks, loosen the clamp assembly (

) and slide the pad inward or out-

ward along the cross tube until the desired pad position is achieved (

). Retighten the clamp assembly to

secure the knee block in place

NOTE:

Please refer to

Section 5.10- Knee Block Angle Adjustment

before re tightening the clamp

assembly.

NEE

LOCK

IDTH

DJUSTMENT

e.g.; Knee Block Pads Adjusted Outward

5.0

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

5.11 KNEE BLOCK WIDTH ADJUSTMENT:

5.10 KNEE BLOCK ANGLE (ROTATIONAL) ADJUSTMENT:

Clamp

Assembly

NEE

LOCK

NGLE

DJUSTMENT

Clamp Assembly

Содержание MPS MAXX MPSS

























































































Результаты поиска

Содержание MPS MAXX MPSS

Отзывы:

Motion Concepts MPS MAXX MPSS, Руководство пользователя, Страница: 62 / 88

Результаты поиска

Содержание MPS MAXX MPSS

Отзывы: