www.moteck.com
24
The fuse is blown after the actuator
is powered.
The fuse specification is
incompatible with the consumption
current of the actuator.
Check whether the specifications of
the fuse used are correct and follow
the recommendations in 3.5.3.
The actuator moves slower or
faster than expected.
The input voltage is too
high or too low.
Make sure to provide the correct
input voltage for the actuator.
The actuator hummed and did not
move.
The power supply is insufficient
to drive the actuator and its load.
Make sure the power supply can
provide enough current to drive
the rated load.
1
No.
2
3
The actuator does not move and
makes no sound.
The actuator is not getting the
correct input voltage range.
Make sure to provide the correct
input voltage for the actuator.
5
When the actuator moves for about
1 second, it stops automatically,
and the same is true for repeated
operations.
The actuator is overloaded or blocked
by obstacles.
Do not repeat the operation again
and again. Please check and remove
possible obstructions before retrying,
or reduce the weight of the actuator
load.
4
Troubles
Possible Causes
Solution Guide
5. Troubleshooting
If the above description does not solve the problem, please contact the seller
for assistance.