MOTECK MK35, Руководство пользователя, Страница: 15 / 26

www.moteck.com
15
Hall 1
Hall 2
High
Low
High
Low
Hall 1
Hall 2
High
Low
High
Low
Actuator extends Actuator retracts
Wire definitions: SHL
Connect Red to positive.
Connect Black to negative.
Do not swap the polarity.
Input voltage: 12/24V±20%
Connect Black to positive (same as V+) to extend.
Vin= 5~32V
Connect Red to positive (same as V+) to extend.
Vin= 5~32V
Power
cable
Description Wire color
Red
Black
Red
Black
White
Resolution:
High= 10.8V (±0.6V)
Low= GND
Hall signal data:
Resolution (pulse/mm)
1.7598
2.9547
3.9035
6.2580
Output= GND (Normally close circuit)
Output= Vcc (End of Stroke, open circuit)
The stroke limit switches are open collector circuit, and the arrival
signal output is not potential free. A 10KΩ pull-up resistor should be
applied in user’s control circuit.
Recommended input voltage is 5~24V.
Definition
V+
V-
Actuator
retracts
Actuator
extends
Orange
Retract EoS
output
Green
Extend EoS
output
GND
10:1
15:1
20:1
30:1
Gear ratio
Yellow Hall 2 output
Blue Hall 1 output
Signal
cable