16
17
Sprog
Sprog
2.5 Operating display and operating keys
10:35
20°C P-1
Drift
Clock
Timer
Room temperature
Power step
Operating key 1-2:
Raise and lower heating power (e.g. step1 -step2- step5-step1-...)
Operating key 3:
On and off
Operating key 4:
Temperature lowering
Operating key 5:
Temperature increase
Operating key 6:
Multi-function key
Operating key 7:
Multi-function key
2.6 Operation and programming your pellet stove
The pellet stove is provided with different functions which are accessible in the individual pro-
gramming menus. Some of these are available to the user, others are protected by a password
and only available to technical services staff. The menus are as follows:
•
Menu 01 SET CLOCK
•
Menu 02 SET TIME
•
Menu 03 SELECT LANGUAGE
•
Menu 04 SEE SETTINGS
•
Menu 05 STOVE STATUS
•
Menu 06 OPERATING HOURS
•
Menu 07 BANK DATA
(password protected)
•
Menu 08 RESET TIMER
(password protected)
•
Menu 09 ADJUST PROGRAMME
(password protected)
•
Menu 10 SELECT FORMULA
(password protected)
Menu 01 SET CLOCK
Setting clock
To set the clock, you must do the following:
1. Hold down key 4 for 3 seconds. MENU 01: SET CLOCK appears. Confirm with key 6.
2. The display shows figures 1-7 and the day of the week or if the timer is deselected OFF
deselected day. Set the current day with keys 4 or 5 or select OFF Deselected day if the
timer is to be inactive, and confirm with key 6.
3. The display shows HOURS CLOCK and the current time: set the hour using keys 4 or 5
and confirm with key 6
4. The display shows MINUTES CLOCK and the current time: set the minutes using keys 4 or
5 and confirm with key 6
5. Press key 3 to return to the main menu
Menu 02 SET TIME
Setting timer
The timer can be used to schedule the pellet stove on and off for each day of the week with
up to four independent timings (PROGRAMME 1, PROGRAMME 2, PROGRAMME 3 and PRO-
GRAMME 4)
Example with 2 independent timings:
To access this menu, use the following procedure:
1. Keep key 4 pressed down for 3 seconds. The text MENU 01: SET CLOCK is
shown.
2. Press key 4 once: The display shows Menu 02 SET TIME
3. Press key 6 to allow access: The display shows the desired screen image. The
lines shown on the display each correspond to a programme.
Description of programme lines:
Description
Adjustable values
START PROG-1
From OFF to 23:50 in 10 minute steps
STOP PROG-1
From OFF to 23:50 in 10 minute steps
DAY PROG-1
Between On/Off for days 1 to 7 (Monday to Sunday)
POWER PROG-1
From 1 to 5
TEMP ROOM PROG-2
From 7° to MAn (MAn means that the sensors is put out of action)
START PROG-2
From OFF to 23:50 in 10 minute steps
STOP PROG-2
From OFF to 23:50 in 10 minute steps
DAY PROG-2
Between On/Off for days 1 to 7 (Monday to Sunday)
POWER PROG-2
From 1 to 5
TEMP ROOM PROG-2
From 7° to MAn (MAn means that the sensors is put out of acti-
on)
START PROG
This parameter shows the time of ignition
STOP PROG
This parameter shows the time of extinguishing (must be no less than 60 mi
nutes from start).
DAY PROG
This parameter is used to set the days on which the selected programme is
active. To set this parameter the following procedure must be followed: Use
key 5 to set the required day (days are 1, 2, etc.) and use key 4 to select the
value ON OFF: If OFF is selected, the programming selected will not be acti
vated on the day previously selected. If ON is selected, the programming will
be activated on the day selected.
POWER PROG This parameter sets the power step at which the stove will start.
SET TEMP PROG This parameter indicates the required room temperature.
10:35
START
PROG - 1
If this black line the display below the clock symbol is not
on, the timer not is active.
