20
21
Sprog
Sprog
PROGRAMME 1 is now completed.
Perform the same programming for PROGRAMME 2 (and any PROGRAMME 3 and PROGRAM-
ME 4) with other parameter values. If you do not want to use other PROGRAMMES, check that
all days are set to ”OFF” under DAY PROG-2 , DAY PROG-3 and DAY PROG-4 and exit the menu
by pressing key 3 twice.
IMPORTANT!
WHEN THE TIMER FUNCTION IS USED, YOU MUST REGULARLY CHECK THAT THE BURN
POT IS CLEAN, SO THAT AUTOMATIC IGNITION AND COMBUSTION WORK CORRECTLY
Menu 03 SELECT LANGUAGE Choice of language
Follow these steps to set the language:
1. Hold down key 4 for 3 seconds. MENU 01: SET CLOCK appears.
2. Press key 4 two times: The display shows MENU 03: SELECT LANGUAGE
3. Press key 6 to allow access: The display shows the chosen language.
4. Select the desired language using keys 4 and 5, confirm by pressing key 6.
(Danish = Danish) ***not sure how to translate!!! ***
5. Press key 3 to return to the main menu.
The languages available may vary according to the type of Firmware revision.
Menu 04 SEE SETTINGS Settings
This menu can be used to check the parameter values set on the printed circuit board. This
menu is used by the service technician to find out which parameters are set on the pellet stove
to be able to make amendments to improve its operation. To access this menu, use the follo-
wing procedure:
1. Hold down key 4 for 3 seconds. MENU 01: SET CLOCK appears.
2. Press key 4 three times: The display shows MENU 04: SEE SETTINGS.
3. Press key 6 to allow access: The display shows the desired screen image.
4. Use key 6 to go through the parameters as set.
5. Move to the last parameter to automatically return to MENU 04: SEE SETTINGS.
6. Press key 3 to return to the main menu.
2000
130°C
AUGER 0
-STATUS
Rpm of smoke extraction motor
Flue gas temperature
Auger status
Stove status
Menu 05 STATUS operating status
This menu can be used to check optimal setting of the most important parameters and some
values that characterise optimal functioning of the stove. Use the following procedure to ac-
cess the menu.
1. Hold down key 4 for 3 seconds. MENU 01: SET CLOCK appears.
2. Press key 4 four times: The display shows MENU 05: STOVE STATUS
3. Press key 6 to allow access: The display shows the desired screen image.
4. Confirm with key 6 to return to MENU 05: STOVE STATUS. This menu can be used if sup-
port is to be requested by telephone and the technician needs to find out what may be
wrong with the pellet stove.
5. Press key 3 to return to the main menu.
Menu 06 OPERATING HOURS Number of hours’ operation
Menu item OPERATING HOURS can be used to show the total number of hours run by the pel-
let stove. It may be that in some cases the hours run have not been reset, i.e. numbers such as
5000/15000/25000 may be shown. The service technician is responsible for resetting the figures
on first ignition. This does not mean that the pellet stove has already run all the hours shown, it
is just a setting made during testing before the stove is packaged and sent out. To access this
menu, use the following procedure:
1. Hold down key 4 for 3 seconds. MENU 01: SET CLOCK appears.
2. Press key 4 five times: The display shows MENU 06: HOURS RUN.
3. Press key 6 to allow access: The display shows the desired screen image.
4. Press key 3 to return to MENU 06: HOURS RUN.
5. Press key 3 to return to the main menu.
Password protected menus
The last 4 menus (MENU 07-10) are password protected and may only be used by authorised
personnel.
IMPORTANT!
THE GUARANTEE IS VOID IF YOU OBTAIN ACCESS TO PASSWORD PROTECTED MENUS
OR PASS ACCESS CODES TO OTHERS
