34
35
Sprog
Sprog
Screw off the protective cap and press the
button to reset the thermostat for thermal
alarm. Repeat the ignition phase after the
cooling phase
AL08
NO UNDER-PRESSURE
Combustion chamber dirty/ chim-
ney blocked
Clean pellet stove/ pipes/
flues
AL12
FAULT RPM SMOKE
Flue gas fan running at at least
15 % less rpm than stated in the
programme line
Refer to your Morsø dealer
ALARM
STATUS AUGER
The auger is not supplying not
timber pellets
Refer to your Morsø dealer
HOT SMOKE
(warning, not alarm)
Combustion is not optimal.
Convection fan is defective
Turn off the pellet stove,
clean the burn pot and ad-
just combustion
Refer to your Morsø dealer
IMPORTANT!
THE STOVE MUST CLEANED BEFORE EACH REMEDIA-
TION
3.3 Information and problems
Please refer to your dealer or to the technical service centre for information or in the event
of problems. These are the only people who can answer all queries or take direct action if
necessary.
Reset the alarm by pressing OK on the display.
Repeat the ignition phase after the cooling phase.
SAFETY RULES
Great attention is paid during production of the Morsø pellet stove to each individual component
to protect both the user and installer against any accidents. The authorised personnel are there-
fore required to be particularly aware of electrical continuity after any work on the pellet stove.
The installation must be carried out by authorised personnel. The personnel must issue a de-
claration of conformity for the system to the purchaser. The purchaser must accept full re-
sponsibility for the final installation and the subsequent correct functioning of installed pellet
stove. Account must also be taken of all national, regional, provincial and municipal laws and
provisions applicable in the country in which the pellet stove is installed. Morsø has no liability in
the event of failure to comply with such safety rules.
These Instructions for Use are an integral part of the product: ensure that they always accom-
pany the pellet stove in the event of transfer to another owner or user, or if it is moved to another
position. If the instructions are damaged or lost, request a new copy from your Morsø dealer.
• At the installation, the user must be informed that:
The pellet stove - especially its external surfaces - reach very high temperatures for touching
during operation. Handle it carefully to avoid burns. The pellet stove is designed to function un-
der any climatic conditions.
Under very unfavourable conditions (wind, frost) safety systems
are activated to turn off the stove. If this occurs, your Morsø dealer must be contacted.
Under no circumstances should you de-activate the safety systems.
This pellet stove must be used for the purposes for which it has expressly been produced. Never
use the stove as an incinerator or for any other purpose that differs from that for which it has
been produced.
Any contractual and non-contractual liability of the producer for injury to people, animals or
objects due to defective installation, adjustment or maintenance errors or incorrect use are
excluded.
No fuels other than timber (white) pellets may be used. Do not use not liquid lighter fuels. Check
after removing packaging from the pellet stove that the contents are intact and complete. All
electrical components which the pellet stove contains may only be replaced with original parts
by an authorised technician.
The stove must be maintained no less than once a year, which should be arranged in time along
with the technical service. Do not perform alterations to the pellet stove without permission.
For safety reasons, remember the following:
•
Children or other unauthorised persons are prohibited from using the stove without assi-
stance.
•
Do not touch the stove if you have bare feet or wet body parts.
•
Altering safety equipment or settings is prohibited without permission from Morsø
(1 : 2)
(1 : 2)
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:10
Rengøring
Morsø P30
RSV
24.10.2012
A2
Date of print: 24-10-2012
U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm
P30-07 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg.:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
