30
31
Sprog
Sprog
(1 : 2)
(1 : 2)
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:10
Rengøring
Morsø P30
RSV
24.10.2012
A2
Date of print: 24-10-2012
U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm
P30-07 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg.:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
The pellet stove is a heating appliance for solid fuel and it is recommended that it is in-
spected and serviced by qualified persons no less than once a year at the beginning of the
season. The aim of this maintenance is to check and ensure that all components function
optimally.
We recommended taking out an annual contract for maintenance of the product with the in-
staller/ dealer/ chimney sweep.
Cleaning the flue
Long-term use of the pellet stove can lead to soot and ash deposits in the flues of the stove.
These must be removed at suitable intervals.
The chimney sweep is obliged to clean the chimney, but the flues inside the pellet stove itself
will not be cleaned unless a specific agreement is made.
Method
Ensure that the stove is extinguished and complete cold. Unplug the power cable from the
socket. The pellet stove flues can be accessed from 3 points:
•
through the right hand inspection cover
•
through the left hand inspection cover
•
from the chimney bottom plate (either a smoke door or removable bottom plug on the T
piece)
Having gained access from these points, soot can be removed using a brush and vacuum clea
ner.
Access to inspection cover
Raise the lid of the pellet hopper. Loosen the 4 bolts that fix the side panels to the stove. The
panels can then be lifted off.
Remove soot from the uncovered inspection holes to the flues.
On completion of cleaning, re-assemble the stove. When re-fitting the inspection covers,
new washers must be fitted to ensure a good seal.
Access to flue at smoke outlet stub.
Using a chimney system terminated by a T-piece with a bottom stopper and possibly a flue
cleaning flap, it is possible to brush and vacuum clean the flue from the outlet stub.
The flues are accessed by loosening the sprung bolts that keep the inspection covers in place.
Remove the inspection covers and washers.
Access to inspection holes, right
and left hand sides
(1 : 2)
(1 : 2)
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:10
Rengøring
Morsø P30
RSV
24.10.2012
A2
Date of print: 24-10-2012
U:\udv\Tegninger\Pilleovn\Morsø P30\Morsø P30 kofiguration 01A\070-MO-001A.sldasm
P30-07 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg.:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
