MORryde Aie1, Руководство пользователя, Страница: 26 / 28

Flat Tire Change Procedure
Coupled to a Tow Vehicle:
STEP 1
Set the tow vehicle's parking brake.
STEP 2
Break loose the lug nuts on the wheel to be changed.
STEP 3
Raise the flat tire slightly off of the ground using a
scissor or bottle jack. Raise the trailer just enough
to remove the tire. Be sure the tire will rotate freely
and the hub is far enough off the ground so the
replacement tire will fit. See appropriate locations
for jack placement.
STEP 4
Remove lug nuts securing the flat tire to the hub.
STEP 5
Remove the flat tire.
STEP 6
Install the spare tire onto the hub.
STEP 7
Install and tighten the lug nuts.
STEP 8
Lower the trailing arm and remove the jack.
STEP 9
Install the lug nuts and tighten in a star pattern.
STEP 10
Torque the lug nuts to the
manufacture's recommendations.
STEP 11
Verify and adjust tire pressure as required.
Uncoupled from a Tow Vehicle:
STEP 1
Position the trailer on level ground.
STEP 2
Use wheel chocks to block the tire/tires that will not
be changed.
STEP 3
Lower the stabilizer and tongue jack.
STEP 4
Break loose the lug nuts on the wheel to be changed.
STEP 5
Raise the flat tire slightly off of the ground using a scissor or
bottle jack. Raise the trailer just enough to remove the tire.
Be sure the tire will rotate freely and the hub is far enough
off of the ground so the replacement tire will fit. See
appropriate locations for jack placement under trailing arm.
STEP 6
Remove lug nuts securing the flat tire to the hub.
STEP 7
Remove the flat tire.
STEP 8
Install the spare tire onto the hub.
STEP 9
Install and tighten the lug nuts.
STEP 10
Lower the trailing arm and remove the jack.
STEP 11
Torque the lug nuts to the manufacturer's recommendations.
STEP 12
Verify and adjust tire pressure as required.