MORryde Aie1, Руководство пользователя, Страница: 15 / 28

574.293.1581
•
MORryde.com
•
PAGE
14
Pair the Module to the Mobile App
STEP 1
Download the free MORryde Air1 app from the Apple App Store for iOS. Search for
MORryde Air1.
STEP 2
Put the module in pairing mode by removing the fuse to the battery and replacing it
after five seconds. The module will remain in pairing mode for three minutes after the
fuse is reinstalled.
STEP 3
The app will automatically go to the "Devices" screen if no connected module is
detected. Click on the device you want to pair. The module will have MORryde Air1 in
the title. Each device also shows the connection status
(fig. 7) .
NOTE:
Once the mobile app is paired to the module via Bluetooth, it will connect
automatically each time the module is active and the device is in range. Only one device
can be connected at a time. To connect another device, the app on any device currently
connected must be closed.
Settings
STEP 1
Open the "Settings" screen (fig. 8) to view these options:
Devices
• Lists modules that are within range.
Troubleshoot
• Displays system error messages
(See
Troubleshooting Guide
section)
Settings
• Pressure control units (PSI or BAR)
• Prevent Screen Lock stops the mobile device screen
from going to sleep while the app is open
Firmware Update
Communicate
•
Online Help
- Links to morryde.com
•
About (fig. 9)
- Shows app software revision and module firmware revision
figure 7
figure 8 figure 9
STEP 4
To pair a second mobile device, repeat the procedure on that device. The module can pair with up to 10
mobile devices. One mobile device can pair with any number of modules; there is no limit.
STEP 2
Use the “Done” button to go back to the user interface.