Morris C2 Contour Скачать руководство пользователя

Страница: 8 / 92

Safety

1-4

August 2014

C2 Contour Air Drill

Chemicals

•

Use extreme care

when cleaning, filling or

making adjustments.

•

Always read

granular chemical or treated seed

manufacturer’s warning labels carefully and
remember them.

• Wear close fitting clothing and appropriate personal

protective equipment for the job as specified by the
chemical and/or seed manufacturer.

•

Always wear

safety goggles, breathing

apparatus and gloves when handling with granular
chemical or treated seed.

•

Do not feed

any treated seed to livestock. Treated

seed is poisonous and may cause harm to persons
or livestock.

•

Wash exposed skin immediately

- do not leave

chemicals on your skin.

•

Properly store

chemicals in original containers with

labels intact per the manufacturer’s instructions.

• Always follow the manufacturer’s operating

instructions and warning labels when operating an
ammonia tank with the equipment.

•

Do Not enter Air Cart tank unless
another person is present and the
tractor engine has been shut off.

Danger

Failure to comply may result in death or serious injury.

Read Operator’s Manual and decals on

Ammonia

tank before operating Air Cart.

Become familiar with all warnings, instructions, and controls.

Always

wear gloves and goggles when transferring or handling ammonia.

Always

stay clear of hose and valve openings.

Always

be sure pressure is relieved before disconnecting hoses or parts.

Always

secure connecting parts and safety chains before towing ammonia trailer.

Always

have ample water available in case of exposure to ammonia liquid or gases.

Содержание C2 Contour





























































































Результаты поиска

Содержание C2 Contour

Отзывы:

Похожие инструкции для C2 Contour

Бренды по названию

Популярные бренды

Morris C2 Contour, Руководство оператора

Результаты поиска

Содержание C2 Contour

Отзывы:

Похожие инструкции для C2 Contour

Бренды по названию

Популярные бренды